Deep green cabinets. Honed marble. A 36-inch range with six burners that you’ve been dreaming about for two years. Then you start shopping for the hood, and every option looks the same. Stainless. Stainless. Slightly different stainless.
That’s usually the moment people find powder coating.
Choosing a custom powder-coated hood comes down to four decisions. Size it at least as wide as your cooktop, wider if you can. Mount it at the right height for its style. Pick your color, sheen and texture. Then choose the shape and the details, like straps, rivets or a brass band. Because it’s built to order, the hood fits your kitchen. You don’t have to bend the kitchen around a stock size.
The short version

Custom Powder-Coated Range Hood
| Decision | Rule of thumb |
| Width | Match the cooktop or go wider |
| Height | Wall chimney hoods usually 24 to 30 inches above the cooktop |
| Airflow | Roughly 100 CFM per 10,000 BTUs |
| Make-up air | May be required by code over 400 CFM |
| Color | Pretty much anything |
| Finish | Flat to glossy, smooth to wrinkled |
| Details | Straps, rivets, buttons, trim, pot rail, lights |
So what is powder coating?
Think of it as paint’s tougher cousin. Except it starts dry.
The powder is a mix of polymer resin, pigment and additives. It gets sprayed on with an electrostatic charge, which makes it cling to the metal. Then the whole hood goes into an oven. The heat kicks off a chemical reaction, and the powder hardens into a dense shell.
Above a stove, that toughness earns its keep. Steam, grease, heat, a splash of degreaser every week. Powder coating stands up to corrosion, chemicals and solvents. It also leaves out the volatile organic compounds, or VOCs, found in a lot of liquid paints.
Ours go over hand-built stainless steel at our factory in Fair Lawn, New Jersey. More on our Powder Coated Hoods page.
How big?
Start with width. Broan-NuTone, a major ventilation maker, says a hood should be at least as wide as the cooktop in most kitchens. For a 30-inch cooktop, their range is a 30 to 36-inch hood. For a 36-inch cooktop, 36 to 42 inches. Smoke doesn’t rise in a perfect column, and a little extra width catches what drifts.
Height is next. Broan puts wall-mount chimney hoods at 24 to 30 inches above the cooktop as a common range, and island and pro hoods at 24 to 36. Gas versus electric changes things, and so does the blower you pick. Go by the blower manufacturer’s specs every time.
Ceilings are where custom really pays off. A 10-foot ceiling needs a taller chimney. A vaulted one needs a chimney cut to the slope. We wrote a whole post on that: Custom Range Hoods for Vaulted and Sloped Ceilings: What Homeowners Need to Know.
Then airflow. Broan’s rule of thumb is about 100 CFM for every 10,000 BTUs. Add up your burners. A 60,000 BTU range lands around 600 CFM. Past 400 CFM, your town may require make-up air, so ask your contractor early. Where the blower sits matters too, and Internal vs Inline vs Remote Blowers: Which Range Hood Blower Is Right for You? explains the trade-offs.
Color, sheen, texture
Here’s where it gets personal.
Powder coating can be made in virtually any color. Navy to match the island. Matte black for a loft look. A warm cream that disappears into white cabinets. Or fire-engine red, if you want the hood to be the whole personality of the kitchen.
Sheen changes everything. A flat or satin finish looks quiet and hides fingerprints. Gloss feels sharper and bounces light around. There are metallic, clear, iridescent and even glittered options if you want to go there.
Texture is the sleeper choice. Smooth is the classic. A wrinkled or rough texture gives the hood depth, and in the right kitchen it reads almost like old iron.
One practical tip. Bring a real cabinet door or paint sample when you choose. A color on a screen and a color under your kitchen lights are two different colors.
Shape and the little things
Shape sets the style. A curved bell feels traditional. A tapered box with a straight chimney feels modern. We have more than 25 designs, or we’ll build from a sketch you bring in. See Shapes & Styles.
Then the details. Straps and rivets. Decorative buttons. A band of brass or mirror stainless against a matte color. A pot rail along the bottom. Built-in lights. All of it is on our Hardware & Accents page.
Open shelves on either side of the range? Plan for them now, not after. How to Plan a Range Hood Around Open Shelving Without Sacrificing Ventilation or Kitchen Design shows how.
Why not just buy stock?
You can. You’ll just be choosing from set widths and set colors. If your cooktop, ceiling or color plan doesn’t line up with what’s on the shelf, something gives. A custom hood is made to your numbers, one at a time. Every one of ours goes through several quality checks before it leaves the shop, and we ship anywhere in the world. More on Why is a Custom Kitchen Range Hood so Special?
Frequently asked questions
How wide should a range hood be?
At least as wide as your cooktop. Broan-NuTone recommends a 30 to 36-inch hood for a 30-inch cooktop and a 36 to 42-inch hood for a 36-inch cooktop.
Is powder coating durable on a range hood?
Yes. It’s cured in an oven into a hard finish that resists corrosion, chemicals and solvents.
What colors can a powder-coated hood come in?
Virtually any color, in finishes from flat and satin to gloss and metallic, with smooth or textured surfaces.
How high should a range hood be mounted?
Wall-mount chimney hoods are commonly installed 24 to 30 inches above the cooktop. Always follow the ventilation manufacturer’s specs.
Thinking about a powder-coated hood? RangeCraft has built custom range hoods in Fair Lawn, NJ, since 1972. Call 201-791-0440, browse the Powder Coated Hoods gallery, read our Testimonials, or contact us.