Every Made-to-Order RangeCraft Hood comes standard with Lights, Filters, Fans and Switches.
The lights are Halogen and produce the brightest light for you to control your meals in the pots and pans.
Recently, RangeCraft developed new and improved filters. They are made of all Stainless Steel and set into a stainless steel frame so that they can never clog up and can easily be cleaned in the dishwasher.
The main features of the new development are:
- Controlled airflow through the filters mean less static pressure and less wind noise pollution.
- Special design baffles mean higher grease separation and no clogging up like antiquated mesh filters.
The new filters are standard with every RangeCraft Hood.
For years RangeCraft fans have set industry standards for their low noise level. Motor noise well below 55 dB at full 600 cfm means that the fans are very quiet.
In a multiple fan installation the RangeCraft Hood can have an installed power of e.g. 2700 cfm, nearly double the amount of the most commonly used external fans at a much lower noise level..
(For exhaust volumes of more than 1200 cfm make-up air should be part of the airflow planning. RangeCraft will provide different configurations of make-up air in their hoods).
Standard switches for the lights are on/off. Dimmers are available at an extra cost. For the fans a 2 speed system (low/high) is standard. An optional 3 speed (low/medium/high) switch is available at an extra cost.